What is a double column mechanical press?
A double column mechanical press has an H-type frame with columns on either side of the working area. An electrically driven mechanical system moves the ram towards the table to carry out the pressing operation.
The PMF, PMV and PMF-2 / PMF-2L ranges use double-reduction drives and are designed for metal forming applications. The ram runs on six prismatic guides.
What is the difference between the PMF, PMV and PMF-2 / PMF-2L series?
The main differences are the stroke arrangement, number of connecting rods and table dimensions.
| Feature | PMF | PMV | PMF-2 / PMF-2L |
|---|---|---|---|
| Listed capacities | 125 to 400 Tons | 125 to 400 Tons | 200 to 500 Tons |
| Stroke | Fixed | Variable | Fixed |
| Connecting rods | One | One | Two |
| Ram guides | 6 Guided Ram | 6 Guided Ram | 6 Guided Ram |
| Table dimensions | 900 × 1000 mm to 1100 × 1300 mm | 900 × 1000 mm to 1100 × 1300 mm | 1300 × 2500 mm for PMF-2; 1300 × 2800 mm for PMF-2L |
Dimensions and capacities shown are from the supplied model tables. Confirm the selected model and its equipment when enquiring.
What is the PMF series?

The PMF is a one-point double column mechanical press with a fixed stroke and a 6 Guided Ram. The listed models range from 125 to 400 Tons, with fixed strokes of 150 or 200 mm depending on the model.
Automatic ram adjustment, PLC and touchscreen controls, hydraulic overload protection and pneumatic balancing cylinders are listed among the features.
View the PMF series mechanical presses
What is the PMV series?

The PMV is a one-point double column mechanical press with a variable stroke and a 6 Guided Ram. The listed models range from 125 to 400 Tons.
The adjustable stroke range is 20–150 mm or 20–200 mm, depending on the model. Automatic ram adjustment and a digital scale for ram adjustment are also listed.
View the PMV series mechanical presses
What are the PMF-2 and PMF-2L series?

The PMF-2 and PMF-2L are two-point double column mechanical presses with two connecting rods, a fixed stroke and a 6 Guided Ram. The supplied model table lists 200, 300, 400 and 500 Ton versions.
The PMF-2L has a larger table than the corresponding PMF-2 model. The listed table dimensions are 1300 × 2500 mm for PMF-2 and 1300 × 2800 mm for PMF-2L.
View the PMF-2 and PMF-2L mechanical presses
What is the difference between a fixed stroke and a variable stroke?
A fixed-stroke press has a set ram travel for the selected machine. A variable-stroke press allows the stroke length to be adjusted within its specified range.
The PMF and PMF-2 / PMF-2L series have fixed strokes. The PMV has a variable stroke, which can be considered where different jobs require different ram travel. Stroke length and available adjustment range depend on the model.
What is the difference between a one-point and two-point press?
A one-point press uses one connecting rod to drive the ram. A two-point press uses two connecting rods. The PMF and PMV are one-point presses; the PMF-2 and PMF-2L are two-point presses.
The appropriate arrangement depends on the tooling, table size, loading and application. Discuss the intended work with us before selecting a model.
What does 6 Guided Ram mean?
Each press has one ram supported and directed by six prismatic guide surfaces as it moves towards and away from the table. The tooling, loading and accuracy requirements should be considered alongside the guide arrangement.
Can the pressing pressure or tonnage be adjusted?
A mechanical press operates differently from a hydraulic press with adjustable hydraulic working pressure. The rated tonnage is the maximum force for which the press is designed under specified conditions; it should not be treated as a continuously adjustable pressure setting.
The force available depends on the press mechanism and ram position. The hydraulic overload protector is intended to protect the machine and tooling against overload; it should not be assumed to provide adjustable production pressing force.
If your process requires controlled pressing force, pressure adjustment or a dwell under load, discuss the application with us. A hydraulic press may be more suitable.
What is nominal tonnage height?
Nominal tonnage height identifies the position above the bottom of the stroke at which the press is rated to deliver its nominal force.
A mechanical press does not deliver its full rated force at every point in the stroke. The force required by the tooling must be checked against the ram position and the machine’s permitted load characteristics.
What is the difference between stroke adjustment and ram adjustment?
Stroke adjustment changes the length of the ram’s working movement. The PMV has an adjustable stroke; the PMF and PMF-2 / PMF-2L have fixed strokes.
Ram adjustment changes the ram setting to accommodate tooling and the required closed height. It does not change the rated capacity of the press. Automatic ram adjustment is listed for these ranges.
Can the operating speed be adjusted?
Speed variation is listed for the ranges, but availability and the achievable speed range depend on the selected machine and configuration.
For the PMF-2 / PMF-2L, speed variation appears in both the standard and optional equipment information. Confirm whether it is included in the quotation for your chosen model.
Why choose a mechanical press instead of a hydraulic press?
A mechanical press may suit repetitive production work where the process and tooling are designed around a recurring stroke and the required force is available at the appropriate point in that stroke.
A hydraulic press may be more suitable where the application calls for adjustable working pressure, controlled ram movement, a dwell under load or force over a greater portion of the stroke, depending on the design of the hydraulic press.
The right choice depends on the material, tooling, force required throughout the stroke and production rate. We can discuss both options before recommending a machine.
What safety features are listed for these presses?
The listed features include a pneumatic clutch-brake, dual safety valve, two-hand and electric pedal controls, PLC control, hydraulic overload protection and photoelectric safety barriers. Pneumatic balancing cylinders are also listed.
Confirm the guarding, controls and safety equipment supplied with the specific machine and their suitability for the intended operation. A foot pedal or two-hand control does not, by itself, replace appropriate safeguarding.
Are the presses CE or UKCA marked?
The presses are supplied with the applicable conformity documentation and instructions. Please contact us to confirm the marking and documentation for the selected machine and its destination.
What inspections are required for a mechanical power press?
Mechanical power presses and their safeguarding equipment must be maintained, inspected and examined as required for their use. The owner or employer is responsible for ensuring that the applicable requirements are met and that operators and inspection personnel receive appropriate training.
What information should I provide for a quotation?
Please provide as much of the following information as possible:
- The material and its thickness.
- The operation, such as stamping, forming or deep drawing.
- The required force and where it is needed during the stroke.
- The tooling dimensions, closed height and mounting requirements.
- The desired production rate.
- How components will be loaded and removed.
- Any safeguarding, automation or optional equipment required.
- Drawings or photographs of the component and tooling, if available.
Double Column Mechanical Press Category
Browse the double column mechanical press category to see the available series and compare their specifications.
View All Double Column Mechanical Presses
Specifications and equipment may change without prior notice. Confirm the details for the selected model when enquiring.
Discuss Your Mechanical Press Application
The Workshop Press Company UK Ltd can help you assess the capacity, stroke, tooling requirements and production rate for your application.
Call: 0800 999 1090
Email: info@workshoppress.co.uk
Send us your drawings, photographs and application details to start the discussion.

