Portal Straightening Press • 80 Ton • Manual Gantry • ST-80
Please contact for prices
The ST-80 is an 80 Ton hydraulic portal straightening press designed for straightening welded structures and plate cut by laser or oxy-fuel.
Its gantry moves manually along the working table, while the hydraulic head is positioned manually across the frame. This allows the operator to reach different pressing points without repeatedly moving the workpiece.
The machine has a motorised hydraulic power unit and a double-acting cylinder operated through a lever-controlled hydraulic distributor. A removable ram foot helps protect the piston during pressing.
The working table is approximately 1001 mm wide and 1750 mm deep. The press has approximately 1100 mm of gantry travel, 729 mm of head travel and a 450 mm piston stroke. Consider component size, weight, support points and tooling when selecting the machine.
Optional equipment includes a machined working table, cylinder extension, wireless push-button control, bending unit and an additional manual pump. Bespoke requirements can be discussed and are subject to technical assessment.
An 80 Ton hydraulic portal straightening press with manual gantry and head positioning for working on welded structures and cut plate.
Specifications
- Model: ST-80
- Capacity: 80 Tons
- Motor Power: 4 HP
- Piston Stroke (J): 450 mm
- Hydraulic Pressure: 317 bar
- Working Speed: 3.81 mm/s
- Approach Speed: Not Stated
- Return Speed: 4.83 mm/s
- Working Table Width (K): 1001 mm
- Working Table Depth (F): 1750 mm
- Head Travel (C): 729 mm
- Gantry Travel (D): 1100 mm
- Horizontal Daylight (A): 1049 mm
- Vertical Daylight (B): 500 mm
- Working Height (E): 800 mm
- Overall Width (G): 1999 mm
- Overall Depth (H): 1750 mm
- Overall Height (I): 2250 mm
- Weight: 1700 kg
Features
- Manual longitudinal gantry movement.
- Manual lateral head movement.
- Electrowelded S355JR steel structure, stabilised and machined after welding.
- Double-acting cylinder with honed sleeve, chrome-plated piston and maintenance-free anti-wear guides.
- Lever-operated hydraulic distributor valve.
- Removable ram foot.
- Motorised hydraulic power unit with pressure-operated disconnection of approach speed and decompression valve.
- Glycerine-filled pressure gauge reading in Tons.
- Motor protection switch and emergency stop.
- Hydraulic oil and instruction manual supplied.
Options
The following optional equipment is listed for the ST-80:
- Machined lower table.
- Cylinder extension.
- Wireless push-button control.
- Bending unit with PROMECAM clamping system.
- Additional single-speed manual pump for manual and motorised operation.
- Geometry customised to customer requirements.
We can also discuss the following requirements for your application:
- HMI configured to customer requirements.
- Multi-language HMI.
- Bespoke machine colour.
- Guarding to customer specifications, including mesh or plexiglass guarding.
- Perimeter light curtains.
- Guarding appropriate for system integration.
- Remote access for technical analysis and issue resolution.
- Bespoke working table sizes and other table arrangements where applicable.
- Bespoke vertical and horizontal daylight.
- Bespoke tools, dies, jigs and fixtures.
- Industry 4.0 integration.
- Industrial robot or cobot integration.
Additional requirements are subject to technical assessment, compatibility with the selected machine and confirmation in the quotation.
ST and TL Series Portal Press Frequently Asked Questions
Find answers to common questions about hydraulic portal presses, their applications, safety features, controls and the differences between the manual ST and motorised TL series.
ST Series Dimensions
The diagram identifies the dimensions and travel positions listed in the table below.

| Reference | Dimension | ST-80 | ST-100 | ST-150 |
|---|---|---|---|---|
| A | Horizontal daylight | 1049 mm | 1151 mm | 1549 mm |
| B | Vertical daylight | 500 mm | 599 mm | 701 mm |
| C | Head travel | 729 mm | 800 mm | 1001 mm |
| D | Gantry travel | 1100 mm | 1349 mm | 2220 mm |
| E | Working height | 800 mm | 800 mm | 749 mm |
| F | Working table depth | 1750 mm | 1999 mm | 3000 mm |
| G | Overall width | 1999 mm | 2200 mm | 2095 mm |
| H | Overall depth | 1750 mm | 1999 mm | 3000 mm |
| I | Overall height | 2250 mm | 2499 mm | 2800 mm |
| J | Piston stroke | 450 mm | 450 mm | 450 mm |
| K | Working table width | 1001 mm | 1100 mm | 1501 mm |
Dimensions are approximate metric conversions from the manufacturer’s catalogue. Confirm dimensions and measurement points before machine selection or installation.







