Address

Kenilworth,
CV8 1NP

Cambering and Straightening Press • 100 Ton • SH-100 • Hidrogarne

Please contact for prices

The Hidrogarne SH-100 is a 100 Ton horizontal hydraulic press designed for straightening and bending beams, profiles and bars. Its horizontal pressing arrangement allows long sections to be supported at working height while force is applied from the side.

The press has a welded C-frame manufactured from S355JR steel, a rear support table with DIN 650 slots and standard support blocks. Two height-adjustable support rollers are provided, one on each side of the machine.

A double-acting hydraulic cylinder provides the pressing force. The cylinder is operated through a lever-controlled hydraulic valve and incorporates an anti-rotation system and removable ram foot. The two-speed hydraulic power unit includes automatic disconnection of the approach speed and a decompression valve.

For longer sections, optional feeding rails are available, including basic height-adjustable and motorised arrangements. Feeding rails and roller tables are optional accessories and are not included as standard. Optional bending equipment and an additional manual pump are also listed.

The correct press and tooling depend on the section size, material grade, direction of bending and required support arrangement. Contact us with details of your application so that the machine and accessories can be assessed for your work.

Request Quote

    The Hidrogarne SH-100 is a 100 Ton horizontal hydraulic press for straightening and bending beams, profiles and bars. It features lever-operated cylinder control, a rear support table and height-adjustable support rollers.

    Specifications
    • Model: SH-100
    • Press Capacity: 100 Ton
    • Motor Power: Approximately 3.7 kW
    • Ram Stroke: Approximately 450 mm
    • Hydraulic Pressure: Approximately 317 bar
    • Throat Depth: Approximately 300 mm
    • Working Speed: Approximately 3.6 mm/s
    • Approach Speed: Approximately 9.9 mm/s
    • Return Speed: Approximately 13.2 mm/s
    • Guide Diameter: Approximately 41 mm
    • Support Table: Approximately 1501 x 500 mm
    • Distance Between Tables: Approximately 640 mm
    • Support Blocks: Approximately 79 x 79 x 500 mm
    • Working Height: Approximately 800 mm
    • Machine Width: Approximately 2649 mm
    • Machine Depth: Approximately 1471 mm
    • Machine Height: Approximately 1021 mm
    • Machine Weight: Approximately 4200 kg
    Key Features
    • Horizontal hydraulic press for straightening and bending profiles, bars and beams.
    • Electro-welded C-frame manufactured from S355JR steel.
    • Main pushing cylinder with anti-rotation system.
    • Double-acting cylinder with a removable ram foot.
    • Lever-operated hydraulic distributor valve.
    • Two-speed motorised hydraulic power unit with automatic approach-speed disconnection.
    • Cylinder decompression valve.
    • Rear support table machined with DIN 650 slots.
    • C45E steel support blocks.
    • Two height-adjustable support rollers.
    • Pressure gauge with reading in tons.
    • Motor protection switch and emergency stop.
    • Supplied with hydraulic oil and an instruction manual.
    Options
    • Basic height-adjustable feeding rails.
    • Motorised feeding rails.
    • Hydraulic lifting and tilting of feeding rails.
    • Bending unit.
    • Additional single-speed manual pump.
    • Machine geometry adapted to customer requirements.

    Feeding rails and roller tables are optional accessories and are not included as standard.

    Cambering and Straightening Press Frequently Asked Questions

    Find answers to common questions about cambering, straightening, press selection, roller tables and the differences between the SH Standard and HV/NC series.

    View Cambering Press FAQs

    SH-100 Horizontal Cambering and Straightening Press

    The Hidrogarne SH-100 is a 100 Ton horizontal hydraulic press designed for straightening and bending profiles, bars and beams. Its horizontal arrangement allows long sections to be supported at working height while the hydraulic cylinder applies force from the side.

    The electro-welded C-frame is manufactured from S355JR steel and is stabilised and machined after welding. A rear support table with DIN 650 slots and C45E support blocks provides the pressing arrangement. Two height-adjustable support rollers are supplied, one on each side of the machine.

    Hydraulic System and Controls

    The double-acting cylinder is operated through a lever-controlled hydraulic valve. It incorporates an anti-rotation system and a removable ram foot. The two-speed motorised hydraulic power unit includes automatic disconnection of the approach speed and a decompression valve.

    Standard equipment includes a pressure gauge reading in tons, a motor protection switch, an emergency stop, hydraulic oil and an instruction manual.

    Optional Equipment and Material Handling

    Optional equipment includes basic height-adjustable or motorised feeding rails, hydraulic lifting and tilting of feeding rails, a bending unit and an additional single-speed manual pump. Machine geometry can also be adapted to customer requirements.

    Feeding rails and roller tables are optional accessories and are not included as standard.

    The appropriate press, tooling and support arrangement depend on the section size, material grade and operation. Contact us with details of your beams, profiles or bars so we can discuss your application.