ERLO SH.18 Bench Top Tapping Machine • V-Belt • Manual Feed

Specifications

Tapping Capacity (Mild Steel): M14<
Transmission: V-Belt
Speed number and range (without variator) : 9100 245 – 355 – 490 – 710 – 835 – 1.240 – 1.670 – 2.000 – 2.480 – 4.000 rpm.
Drilling feed: Manual
Main motor power motor 1000 rpm: 1.5Hp
Spindle cone: MT3
Maximum tapping depth: 90 mm
Distance spindle-column: 250 mm
Distance spindle-table : Min 155 mm / Max 485 mm
Distance spindle-table (models with coolant): Min 2250 mm / Max 555 mm
Column diameter: 100 mm
Dimensions of the table: 270 x 270 mm
Dimensions of the table/base (with coolant): 316 x 288 mm
CE Certified : Yes
Weight: net / gross kg. : 230 / 250 Kgs
Shipping Dimensions: 890 x 640 x 1350 mm

Tapping Details

• THREAD METRIC: M2 / M2.5, PITCH*: 0.45, PITCH WITHWORTH: 12H”
• THREAD METRIC: M3, PITCH*: 0.5, PITCH WITHWORTH: 14H”
• THREAD METRIC: M4, PITCH*: 0.7, PITCH WITHWORTH: 16H”
• THREAD METRIC: M5, PITCH*: 0.8, PITCH WITHWORTH: 18H”
• THREAD METRIC: M6 / M7, PITCH*: 1, PITCH WITHWORTH: 20H”
• THREAD METRIC: M8 /M9, PITCH*: 1.25, PITCH WITHWORTH: 24H”
• THREAD METRIC: M10 / M11, PITCH*: 1.5, PITCH WITHWORTH:
• THREAD METRIC: M14 / M16, PITCH*: 2, PITCH WITHWORTH:
• THREAD METRIC: M18 / M20 / M22, PITCH*: 2.5, PITCH WITHWORTH:
• THREAD METRIC: Right thread pitches, PITCH*: , PITCH WITHWORTH:
• NOTE: Special pitches: all the pitches with left thread and the pitches with right thread not stated in this chart

Features

• Standard equipment
• Table & Base with DIN-650 T-Slots
• Adjustable depth end
• Lighting equipment
• Tool ejector
• Belt cover with stop micro
• 1 lead screw included, pitch to be determined
• Tapping cycle selection (1 cycle / continuous cycle)
• Automatic or manual tapping selection
• Adjustable ends and micros, for depth, turning and stop
• Bracking device for variator
• Emergency push button
• Main switch
• Turning sense selector
• Electrical equipment at low voltage
• Electrical equipment in a separate cabinet
• Drill Guard with Micro-Switch
• CE Certified

Optional Accessories

• Frontal wheel for fine sensitive feed (V – 10020)
• Depth digital reader (LBC – 10022)
• Lead screw, special pitch (HGP-S – 10075)
• Lead screw, standard pitch (HGP – 10080)
• Base cabinet with door and shelves (PKB – 10082)
• Base cabinet (only for models with intermediate table) (PKC – 10084)
• Fixed intermediate table (MIF – 10087)
• Rotating intermediate table (MIG – 10088)
• Cycles counter (for machines with hidroblock) (CC – 10085)
• Column supplement 200 mm. (SC – 10110)
• Coolant equipment-sr (ERB – 91118)