ERLO SHE.30 Bench Top Tapping Machine • Gear Driven • Manual Feed

Specifications

• Tapping Capacity (Mild Steel): M25
• Transmission: Gear
• Speed number and range (without variator):(8) 65 – 125 – 185 – 365 – 540 – 1055 – 1560 – 3060 rpm.
• Drilling feed: Manual
• Main motor power motor 1500 rpm: 2 HP
• Spindle cone: MT3
• Maximum tapping depth: 90 mm
• Distance spindle-column: 250 mm
• Distance spindle-table :Min 155 / Max 485 mm
• Distance spindle-table (models with coolant): Min 225 / Max 555 mm
• Column diameter: 100 mm
• Dimensions of the table:270 x 270 mm
• Dimensions of the table/base (with coolant): 316 x 288 mm
• CE Certified: Yes
• Weight: net / gross kg. :290 / 340 Kg
• Shipping Dimensions: 860 x 640 x 1350 mm

Features

• Automatic tapping feed
• Geared drive
• Fixed Table
• Rotating Headstock
• Gears are Hardened and Ground
• Table & Base with DIN-650 T-Slots
• Adjustable depth end
• Lighting equipment
• Tool ejector
• 1 lead screw included, pitch to be determined
• Tapping cycle selection (1 cycle / continuous cycle)
• Automatic or manual tapping selection
• Adjustable ends and micros, for depth, turning and stop
• Bracking device for variator
• Emergency push button
• Main switch
• Turning sense selector
• Electrical equipment at low voltage
• Electrical equipment in a separate cabinet
• Drill Guard with Micro-Switch
• CE Certified

Tapping Specifications

• THREAD METRIC: M2 / M2.5, PITCH*: 0.45, PITCH WITHWORTH: 12H”
• THREAD METRIC: M3, PITCH*: 0.5, PITCH WITHWORTH: 14H”
• THREAD METRIC: M4, PITCH*: 0.7, PITCH WITHWORTH: 16H”
• THREAD METRIC: M5, PITCH*: 0.8, PITCH WITHWORTH: 18H”
• THREAD METRIC: M6 / M7, PITCH*: 1, PITCH WITHWORTH: 20H”
• THREAD METRIC: M8 / M9, PITCH*: 1.25, PITCH WITHWORTH: 24H”
• THREAD METRIC: M10 / M11, PITCH*: 1.5, PITCH WITHWORTH:
• THREAD METRIC: M14 / M16, PITCH*: 2, PITCH WITHWORTH:
• THREAD METRIC: M18 / M20 / M22, PITCH*: 2.5, PITCH WITHWORTH:

• Optional Equipment
• Frontal wheel for fine sensitive feed (only for she serie) (V – 10020)
• Depth digital reader (LBC – 10022)
• Lead screw, special pitch (HGP-S – 10075)
• Lead screw, standard pitch (HGP – 10080)
• Base cabinet with door and shelves (PKB – 10082)
• Base cabinet (only for models with intermediate table) (PKC – 10084)
• Fixed intermediate table (MIF – 10087)
• Rotating intermediate table (MIG – 10088)
• Cycles counter (for machines with hidroblock) (CC – 10084)
• Column supplement 200 mm. (SC – 10110)
• Coolant equipment (ERB – 91118)